Description
Shopkeeper Recommend
100pcs/lot 18×25/20×30/22×30/30x40mm Oval Glass Cabochons Flat Back Clear Crystal For DIY Charm Pendant Necklace Jewelry Making
Item detail as below:
Size:
18×25/20×30/22×30/30x40mm oval glass
Color: clear
Quantity: 100pcs/lot
Production process:
> Start by taking your image and sealing it with a thin coat of clear drying craft glue, such as modge podge or PVA glue. You can also use a spray sealer if you have it on hand. This seals the image ink and prevents any color bleeds later on.
> Once your image has been sealed, you can glue it onto the glass tile/slide.
> Cover the glass tile in a coat of glue and gently place the image down onto the tile.
> Press the paper image down in the centre and work your way out to the edges. This allows any air bubbles to escape to the edges.
> Once the image is flat against the tile apply firm pressure and make sure all the edges are well stuck down.
> Finish it off by placing a little more glue on top of the paper the back of the image to seal the back of the pendant. Make sure the glue seals all the edges. If you are using modge podge or glue then give it 3-4 coats at least allowing it to dry between coats as this will SEAL it better.
> Finish off this pendant by gluing on your aanraku bail with strong craft glue.
Reviews
There are no reviews yet.