12V 120AH 100AH 80AH 60AH LiFePO4 Battery 12v lifepo4 100AH,120ah,80ah battert 12v Lithium iron phosphate battery for engine

Description

12V 120AH 100AH 80AH 60AH Battery（Optional Bluetooth BMS）

For EU buyers, please note:
     The batteries in our EU warehouse have been sold out. The batteries you purchased need to be shipped directly from China. Thank you!

Please purchase the following link if you need to purchase the batteries delivered from the EU warehouse
12V 150AH battery purchase link:
//www.PORTAL.us/item/3256801407665242.html

12V 200AH / 300AH battery purchase link:
//www.PORTAL.us/item/2255800486150393.html

24V100AH/120AH/150AH battery purchase link:
//www.PORTAL.com/item/4001324308119.html

24V60AH/80AH/150AH battery purchase link:
//www.PORTAL.us/item/2255801038988154.html
Technical Parameters

Rated capacity: 12V120AH,100AH,80AH,60AHOptional Bluetooth BMS

1. Battery cell type: LiFePO4 battery

2. Weight:

12V 60AH: about 5.2kg
12V 80AH: about 6.2 kg
12V 100AH: about 7.8kg
12V 120AH: about 8.8kg

3. Size: 275 x 235 x 165 mm120ah,100ah,80ah,60ah is of this size

4. Nominal voltage: 12.8V

5. Operating voltage range: 12v10V~ 14.6V

6. Maximum charging current: 30A

7. Charging voltage: 14.6V

8. Continuous discharge current:
12V 60AH:≤80A with 80A BMS
12V 80AH:≤100A with 100A BMS
12V 80AH-bluetooth: ≤80A with 80A Bluetooth BMS
12V 100AH: ≤100A with 100A BMS
12V 100AH-bluetooth: ≤80A with 80A Bluetooth BMS
12V 120AH:≤100A with 100A BMS
12V 120AH-bluetooth: ≤80Awith 80A Bluetooth BMS

9 Instantaneous discharge current: ≤ 160A

10. Service life: more than 3000 cycles

11. Operating environment: 0 ~ 45℃
charging, -20 ~ 60℃ discharging

12. Battery storage period: 90 power
6 months

13. Battery warranty: 12 months free warranty
Accessories and gifts display

10A charger with European standard or American standard or the British standard or Australia standard plug according to buyer's national standards.

1. Charging voltage: 14.6V
2. Charging current: 10A
3. Input voltage: 100v-240v

NOTE: The red indicator light indicates that the charging is in progress, and the green indicator light indicates that the charging is completed.
Interface Introduction

Note: all interfaces can be charged and discharged!

① Charging socket GX16,3-pin airhead
This interface is used by the charger to charge the battery, Its overcurrent is less than 10A.

② Waterproof plug 20A
Its generally used to connect low-power load equipment such as fish detector. Its overcurrent is less than 20A.

③ Anderson plug 50A
Anderson plug 50a specification is mainly used to connect low-power electric motor below 600W. Its overcurrent is less than 50A

④⑤ 8mm terminal Discharge/charge interface
Its overcurrent is less than 150A.
Suitable for connection with 8 mm diameter copper nose.

⑥ USB3.0/PD
It can charge electronic and digital products such as mobile phones and Notebook computer.

⑦ Display
It can display voltage, power percentage and temperature.

Please note:
The percentage of electricity displayed on this display is inaccurate. When using it, you need to estimate the remaining electricity according to the voltage.
1. The power of 12V LiFePO4 battery is concentrated between 12.2v-13.2v. When the voltage is lower than 12V, BMS will soon cut off the battery output.
2. When charging, the indicator light of the charger changes from red to green to indicate full charge.
Application

Boat propeller battery, Camper/scooter, golf trolley/carts, power tools…

Inverter, Solar and wind power system, RV, caravan…

Back-up system and UPS…

Torch LED light emergency light.
Battery cell type

Adopts large single high power LiFePO4 battery. The current output is more stable and stronger.
LiFePO4 battery have higher safety, longer service life and a wider operating temperature range.
Built-in BMS

12V 60AH:≤80A with 80A BMS

12V 80AH:≤80A with 100A BMS
12V 80AH-bluetooth: ≤80A with 80A Bluetooth BMS

12V 100AH: ≤100A with 100A BMS
12V 100AH-bluetooth: ≤80A with 80A Bluetooth BMS

12V 120AH:≤100A with 100A BMS
12V 120AH-bluetooth: ≤80Awith 80A Bluetooth BMS

Built-in BMS battery management system, functions
1. over charge protection. 2. over current protection. 3. over voltage protection
4. discharge protection. 5. short circuit protection. 6. over power protection.
7. temperature protection.
Better service

Contact the seller, know more products information.
Capacity and output interface can be customized.
Introduction of manufacturer