Description
Outdoor Gas Tank Inflation Valve, Cylinder Gas Inflate Kit, Quick Connect Tank Refill Adapter for Camping, Hiking, Gas Tank Inflation Joint Tool, Gas Refilling Accessory
Feature:
Inflation steps and precautions note that the operation of liquefied gas is dangerous, please be sure to operate in an open outdoor place, and operate with care: First install the empty bottle of the cassette gas tank on the inflation valve. Make sure to close the inflation valve switch tightly.
Put the liquefied gas cylinder that meets the national standard upside down on a stool or other stable table with a height difference of more than 20cm. Confirm that the switch of the LPG cylinder is closed tightly
Install the inflation valve with the cassette air tank on the liquefied gas cylinder.
After placing it steadily, turn on the switch of the liquefied gas cylinder, and then turn on the switch of the inflation valve to start inflation please control the inflation time, and never overcharge. The inflation capacity of the cassette gas cylinder is generally recommended to be within 180 grams, approximately about a minute of filling, the gas tank can be removed and weighed to confirm whether the weight of the gas tank is excessive.
At the end of inflation, first turn off the switch of the liquefied gas cylinder, then turn off the switch of the inflation valve, and then remove the inflation valve and the cassette gas tank in turn.
Specification:
Name: Direct-connected cassette inflation valve
Material: copper, zinc alloy, iron
Color: golden
Product size: 115mmx110mmx110mm/4.53inx4.33inx4.33in
Net weight: 100g
Gross weight: 100g
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1 x Inflation Valve
1 x Storage Bag
Reviews
There are no reviews yet.