2022 Private custom Carbon fiber wheels quadro carbono road/MTB/gravel 29er bike frame Taiwan велосипедный завод bicicleta

Description

Custom process
Step 1: Contact customer service!

Step 2: Confirm the wheel size, hub, and spoke information you need!
Step 3: Submit your custom requirements!
Step 4: Start Design and Production!

Step 5: Delivered to you by the agreed shipping method!
Purchase Notes

1.100 US dollars does not represent the final price, customer service will give you the final quotation after confirming all the information!

2. The design and production of the frame takes 30-50 days, and the time will increase according to the difficulty of design and production! If it is not acceptable, please do not place an order!

3. The custom frame is a special commodity, and no return or exchange is accepted for non-quality problems!

Build your wheelset
Choose rim size

Choose Hub

Spokes

Customized LOGO

Production Process

1. The Carbon Fiber We use

We use exclusively the material from Toray® Japan, Toray is the technology world leader in the carbon fiber industry. Their material is used by the largest airplane companies. The exact model we use for the rim is T800, which provides the rim a high tensile.

2. Carbon Fiber Cutting

Trimming is the first step to produce a carbon fiber part, what we get originally is a carbon sheet in 1 meter width, for the sake of saving material, we input the shape we need for the product and let computer to do the math, the computer returns a result of how to use the most of a carbon fiber sheet.

Following the computing result, we use the cutting machine to do the work, the machine will follow the input data exactly and tolerance will be controlled under 0.1mm.

3. Molding

Molding is the key step in the whole process, if this is not handled well, the output will be useless and it will be throug away.

After laying up, it looks like we have a rim shape, but the material are not stick to each other. The carbon fiber sheet is already mixed with resin, after heating up the mold, the resin will melt and combine the layers of carbon into a strong mixture.

And there is an air bag inside the rim, we inject air after we put the rim in the mold, the full filled air bag will make sure the pressure is equal on the whole inner surface of the rim, that means the inner surface rim will be smooth, although it can not be seen.

4. Finishing

When the rim come out from the mold, a new rim is born, but it’s still a rough work, it has over flow resin around it caused by the pressure of the air bag, and the outter fiber is not covered, so we have to trim the workblank and then make coating over the outter layer fiber, to protect the fiber from the exposure and rainning condition.

Under the coating is where the decal applied, the decal is only 0.3mm thick, after we make the coating over the decal, the decal will not get exposed, which also makes it has a integral looking with the rim and will never get lost or scratched.

5. Inspecting & Testing

The recommended tire pressure for our wheels are 120psi, but before we ship every single wheels, we will install the tires and make the pressure at 160psi, wheels are needed to pass this test before they get shipped.