Car Aux Bluetooth Receiver Bluetooth Audio Receiver 3.5mm5.0 Bluetooth Adapter Converter

Description

Car Aux Bluetooth Receiver Bluetooth Audio Receiver 3.5mm5.0 Bluetooth Adapter Converter

Product introduction:
The Bluetooth music receiver hands-free is a high-tech wireless product that can receive music from a mobile phone or a Bluetooth-enabled transmitter. This music receiver can be used with almost all audio receivers with input plugs, including car devices. You can listen to the music received from your smart phone and MP3 in your home speaker or car audio system. Enjoy the melodious car music and call solutions, and use your smartphone to make calls and enjoy music through the car stereo. With a single tap, you can make hands-free calls, enjoy music stored on the phone, and even play Internet radio. The product has an embedded echo cancellation microphone, which can easily switch between music and phone calls with just one button.

Packaging accessories:
1. Bluetooth music receiver
2. USB cable

3.3.5 Metal head

4. Instructions

Charging:
1. Use one end of the provided USB cable to connect to the mini-USB input port of this Bluetooth music receiver
2. Connect the other end of the USB cable to your computer, notebook or USB power converter. At this time, the LED light of the Bluetooth music receiver turns red, indicating that it is charging.
3. When the charging is over, the red LED light will go out, and it can provide up to 8 hours of playing time when fully charged
pair:
1. Enter the pairing mode, press and hold the switch button for 5 seconds until the red and blue LED lights flash at the same time
2. Find the Bluetooth music receiver on your mobile phone or related transmitter
3. At this time, the device is paired and connected. After the connection is successful, the LED light of the Bluetooth music receiver turns blue and flashes slowly
4. For some devices that require a pairing password, please enter 0000
5. Once the pairing is successful, the device can be powered off, and there is no need to re-pair it next time you connect
If paired:
1. Power on: Press and hold the switch button on the Bluetooth music receiver for 3 seconds until the LED light turns blue and flashes to complete the power on
2. Shut down: Press and hold the switch button for 5 seconds, at this time the red LED light will be on and then turn off.
Note: Please read the instruction manual of your transmitter or mobile phone carefully to find out how to use its Bluetooth wireless technology;
If you want to use this Bluetooth music receiver to connect to other mobile phones or transmitters, you must re-pair.
play music:
1. Use the provided audio cable and connector to connect the Bluetooth music receiver to your home audio or car stereo device
2. Please make sure that the transmitter Bluetooth audio receiver, mobile phone, or other related devices has been turned on and paired with the Bluetooth music receiver, and the device is within 10m
3. Now that the music is playing, the music will be wirelessly transmitted to the Bluetooth music receiver via Bluetooth
Note: If you cannot listen to music:
a Please make sure your stereo system has been connected to the Bluetooth music receiver
b Check to make sure that your audio volume is not adjusted to the minimum or muted.
Handsfree:
1. When your mobile phone uses a Bluetooth microphone by default, hands-free calls can be realized through the built-in MIC when a phone is connected
2. When a mobile phone calls, press the power button once to answer the voice call
3. After the call is completed, it will automatically switch to the previous state of the phone
Indicator light shows:
1. Pair or establish a connection: the red and blue LED lights flash at the same time
2. Once connected and playing: the blue LED light flashes once every 3 seconds
3. Sleep mode: the blue LED light flashes once every 5 seconds
4. Charging: the red LED light is on
5. Charging and connected: the red LED light flashes slowly
Troubleshooting:
The connection of the Bluetooth music receiver is established on the basis of the completion of the pairing. The connection interruption may be due to the following reasons:

The distance between the equipment is more than 10 meters, or there are other obstacles such as walls, furniture, etc.
One or both of them are turned off, or it may be because of no electricity
The connection is not made within the specified time, the device is in sleep mode or the power is turned off. Turn off and turn on the device to reconnect, follow the steps below:

Restart the music receiver and sender
Reconnect after restarting, pairing
Power up the music receiver and transmitter again