Carbon MTB Seatpost Offset 25mm Mountain Bike Seat Tube 25.4/27.2/31.6 Ultra-light Gloss/Matte Road Bicycle Seat Post

Description

Product description
:

Brand:PLATT

Material:Carbon Fiber

Appearance:3K Matte/3K Glossy

Color:Black

Diameter:25.4/27.2/30.8/31.6mm

Length:350/400mm

Weight:Approx 205g 31.6 x 350mm

Used:Road bike, MTB,TT bike, track bike and so on

Offset:25mm

Torque:4 Nm

Feature:Easy to install and remove, adjustable saddle angle

Precautions:

As the frame seat is 27.2mm, need to buy less than 27.2 caliber seat post to install.

We produced all the seat tube diameter will be less than the size of the label:

Seatpost Diameter is 26.8 ~ 27.2mm Used in frame seatpost 27.2mm;

Seatpost Diameter is 30.4 ~ 30.8mm Used in frame seatpost 30.8mm;

Seatpost Diameter is 31.3 ~ 31.6mm Used in frame seatpost 31.6mm;
Some
customers to buy the frame seatpost diameter is not standard, resulting
in the seatpost can not be installed, please be sure to check,The
seatpost needs to be properly secured using the seatpost clamp.

Tips:

1,The
saddle can be adjusted by adjusting the bicycle seatpost screws at the
front and rear of the clamp seat to adjust the angle of the saddle in
small increments. It can adapt to different needs on the road and adjust
to a comfortable sitting position.Carbon Fiber seatpost compares to
Aluminum Alloy seat post :Lighter in weight.Much more beautiful in
appearance. Brighter in Color. Stronger in pressure resistance.
Anti-Shock. Has proper elasticity, improving your bicycle class in
minutes.

2,Install
the MTB carbon seatpost correctly, please follow the specified
tightening torque 4Nm,Tighten the screws. Since it is made of carbon,
we recommend tightening the body to support it by tightening with your
hands. Cracks can occur when strong tensions occur.Recommended for use
with carbon fiber seatpost clamps.

3,This
road bike seat post is suitable for attachment to a saddle with a hole.
If there is no hole in the saddle, we recommend using a hexagon wrench
to tighten the screw.The clip seat part is made of high-strength
aluminum alloy, one-piece molding, safe and durable; Structure of upper
and lower clip parts, supportive bow cushion.Fit for bow
size:6 x 6mm/7 x 7mm/7 x 9mm/7 x 10mm/8 x 10mm.

4,About
Choose the carbon seat post size:1.Choose Same size diameter With the
original seatpost. 2.Choose the size according to the inside diameter ofthe frame tube