Current Meter Primary Secondary Coil Electromagnetic Induction Coil Experiment Instrument for Physics Teaching Ampermeter

Description

Primary Secondary Coil Electromagnetic Induction Coil Experiment Instrument for Physics Teaching

Feature:

1. Lightweight and portable, the electromagnetic induction spiral coil specializes in electromagnetic induction phenomena, which is convenient to carry and use.
2. Easy to use, it can be used with bar magnets, ammeters, sliding varistors and other instruments.
3. Physics laboratory equipment auxiliary tools make physics experiment learning more efficient.
4. Rugged and durable, constructed of enameled copper, wear resistant, not easy to be damaged, and long service life.
5. It is designed to demonstrate electromagnetic induction and verify Lenz's law for students. It is an ideal choice for physics teaching.

Specification:
Item Type: Electromagnetic Induction Coil

Material: PVC+Brass
Purpose: Middle and high school physics experiment
Applicable Experiments: Study electromagnetic induction, verify Lenz's law, study magnetic induction
The outer diameter of the hole at the bottom of the original coil is: Approx. 40mm / 1.6in
The inner diameter of the hole at the bottom of the original coil is: Approx. 25mm / 1.0in
The height of the round hole at the bottom of the original coil: Approx. 60mm / 2.4in
The diameter of the hole at the bottom of the secondary coil is: Approx. 25mm / 1.0in
The inner diameter of the circular hole at the bottom of the secondary coil is: Approx. 15mm / 0.6in
The height of the round hole at the bottom of the secondary coil: Approx. 80mm / 3.1in
Soft Core Length: Approx. 85mm / 3.3in

How to use:

1. Study the of electromagnetic induction: connect the two ends of the secondary coil B to the two terminals of the ammeter with wires;
When using one end of the bar magnet to quickly insert or withdraw the secondary coil, the pointers of the galvanometer are all deflected, indicating that there is an induced current in the secondary coil at this time. This is called electromagnetic induction. On the contrary, if the magnet is fixed, the movement of the auxiliary coil will also produce the same
2. Verify Lenz's Law
1 Experimental method: Observe the change in the direction of current indicated in the galvanometer when the magnet is inserted or withdrawn, and when the polarity of the magnet changes;
2 Connect the original coil to a 3-4V DC power supply, and put a single?pole switch and a 109 sliding rheostat in series in the circuit. The same occurs when the original coil is used instead of the magnet to do the above experiment. Changing the direction of current flowing into the primary coil will change the direction of induced current in the secondary coil.
3 According to the device in picture2, first insert the primary coil into the secondary coil, and then energize the primary coil. When the switch is just turned on or just cut off, the magnetic flux passing through the secondary line diagram changes, which also occurs at this time. The current is induced, and the direction of the current is opposite. Change the direction of the current flowing into the primary coil and redo this experiment, the direction of the induced current in the secondary coil will also change.
4 According to the device in picture 2, insert the primary coil into the secondary coil and connect the circuit, and then use the sliding rheostat to quickly change the current through the primary coil increase or decrease, and the secondary coil will also be Generate an induced current, and the direction of the induced current is the same as picture 3.
Synthesize the above experimental results and analyze it to verify Lenz's law.
3. Study the of magnetic induction
Put the primary coil in the above picture 2 device into the secondary coil and wait for it to stand still. There is no induced current in the secondary coil. At this time, insert or withdraw the soft iron core C into or out of the central hole of the primary coil, the soft iron core is magnetized, and the magnetic field Increase or decrease. The change in the magnetic flux in the secondary coil also generates induced current. This experiment can explain both the magnetic induction and electromagnetic induction phenomena. During the experiments in the device picture 2, insert the soft iron core into the center hole of the original line diagram for demonstration, and the induced current in the secondary coil will increase the effect more obviously.

Package List:
1 x Primary Coil A
1 x Secondary Coil B
1 x Soft Iron Core C

Note:

1. Since the DC resistance of the original coil is very small, the current can not be too large, the power‑on time should not be too long, and the power supply voltage should not exceed DC4V.

2. Pay attention to protect the plastic frame, and don't let it subject to strong collision or fall on the ground.

3. After the instrument is used, it should be placed in a clean, dry and ventilated place without corrosive gas.

1 We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.

2 Payment must be made within 3 days of order.

3 If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.   

About shipping

1. WORLDWIDE SHIPPING. Except some countries and APO/FPO

2. Orders processed timely after the payment verification.

3. We ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.

4. The images shown are not the actual item and are for your reference .

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.

6. If you have not received your shipment within the period,  please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

8. We seller are not in charge of import duty, buyer is responsible for that. Any dispute caused by this is unreasonable.

9. BR buyer please provide the cpf or cnpj, it will be better for you to get it more quickly. thanks

Return and Refund

1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.

3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from PORTAL. OR, you may choose to have a replacement.

4.  We will bear all the shipping cost if the products is are not as advertised.

About feedback

We maintain high standards of excellence and strive for 100 customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

It is impossible to address issues if we do not know about them!