Sale!

DC5-12.0V Input Voltage ZVS Induction Heating Board 120W Large Power Flyback Heating Driver DIY Cooker and Ignition Coil

50.01 $

1997 in stock

Additional information

Power

120W

Voltage

DC5 - 12.0V

Model Number

Heating Board

Brand Name

meterk

Origin

Mainland China

Certification

NONE

Description

This product is a non-tapped mini ZVS finished-board, induction heating, excluding cooling fan. The maximum power is 120W 12.0V induction heating. Push the transformer 12.0V, the primary 10 turns, about 30W. DC5V-12.0V input voltage, this voltage-ranges is working voltage, not the no load voltage of power supplys. The voltage exceeds 12.0V or below 5V, we do not guarantee that it can work normally. Equipped with blue LED indicator light, if the indicator light is weak, means the power supplys is insufficient and you need to replace it with a higher power supplys.

Features:


This is a non-tapped mini ZVS finished-board, induction heating, tesla and Jacob's Ladder driver, cooling fan is not included.
The maximum power is 120W 12.0V induction heating. Push the transformer 12.0V, the primary of 10 turns, about 30W.
DC5V-12.0V input voltage, this voltage-ranges is working voltage, not the no load voltage of power supplys. The voltage exceeds 12.0V or below 5V, it is not guaranteed to work properly.
Make sure that all component parts are soldered correctly, the positive and negative poles of the power cord are not reversely connected, the load is connected, and then power on; do not power on at no-load which makes it easily broken.
The width of the object to be heated should be between 1/3~1/2 of the inner diameter of the heating coil, and the width should not exceed 2/3.
The diameter of the heating object should be controlled within 20mm as much as possible, if the heating object is too large, it will be difficult to heat it into red-hot, due to the limited power.
The current is relatively large during induction heating, the coil heat is also relatively large, usually work for 5 minutes to power off to cooling and please solder the heating coil directly to the printed circuit board during induction heating.
Equipped with blue LED indicator light, if the indicator light is weak, means the power supplys is insufficient and you need to replace it with a higher power supplys. Possible reasons for the indicator light not being on are:

1. the line is not connected properly and the power supply is not energized.
2. there are components on the board that are damaged.

Specifications:


Name: Induction Heating Board
Input voltage: DC5-12.0V
Maximum Power:150W12.0V Inductive Heating
Item size: 55 x 38 x 1.6mm / 2.17 x 1.50 x 0.06in
Package size: 80 x 80 x 30mm / 3.15 x 3.15 x 1.18in
Package weight: 50g / 1.76ounce

Packing List:
1 x Module
1 x Coil



















Reviews

There are no reviews yet.

Be the first to review “DC5-12.0V Input Voltage ZVS Induction Heating Board 120W Large Power Flyback Heating Driver DIY Cooker and Ignition Coil”

Your email address will not be published.

Więcej podobnych produktów od innych sprzedawców


Najnowsze produkty




Kategorie







Back to Top

Masz więcej pytań?
Wypełnij właściwy formularz:

 Kontakt         Zwroty


Wsparcie

793 010 610
Formularz kontaktowy
Formularz zwrotów
Regulamin oraz ochrona
danych osobowych RODO
Centrum Pomocy

Chcę coś kupić ale szukam informacji jak zamówić...
Kupiłem coś ale chcę poznać status zamówienia...
Odebrałem paczkę ale mam pytanie lub problem...
Chcę dokonać zwrotu i potrzebuję informacji...
O Firmie

Droptech Sp. z o.o.
droptech.polska@gmail.com
ul. Łódzka 118, Piotrków Tryb.
Sprzedajemy tylko przez internet
NIP: 7712911090
REGON 386758083
O Sklepie

Wysyłka bezpośrednio od producenta lub dostawcy
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki
CAŁKOWITY ZWROT podczas reklamacji



Wyprzedaż i tanie rzeczy do 50, 60, 70, 80, 90, 100 zł. Bezpieczne płatności i łatwe zwroty.
Sklep online - znajdziesz tu atrakcyjne produkty, upominki, prezenty, drobiazgi, gadżety, akcesoria.