Additional information
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | Commercial stove infrared anti - air burning controller |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Sklep online tanie
177.50 $
50 in stock
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | Commercial stove infrared anti - air burning controller |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Commercial stove infrared anti-air burning controller function description
The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process:
The controller turns on the power switch, starts ignition, opens the air valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, such as infrared light is blocked. It means that there is a pot to keep the burning state, otherwise the gas valve is closed and the flame is extinguished to prevent air burning. After that, the pots were monitored at any time, and there were pots and no pots. Function Description 1. High-energy ignition, sparks like open flames.
2. Prevent empty burning waste, automatically turn off the oil off the pot, put the pot to automatically send oil to ignite.
3, 24V gas solenoid valve with emergency switch, can be opened for continued use in case of accident. Installation Notes
1. Determine the installation position of the control box according to the length of the lead wire. It is recommended to install it on the iron frame behind the front plate of the furnace to avoid the high temperature area as much as possible.
2. Install the gas solenoid valve horizontally and keep the solenoid valve away from the high temperature zone.
3. Ignition pin installation method: double-needle ignition two-pin furnace fires each other, installed near the air outlet.
4. Installation of infrared emission and reception. Controller related connection:
1. Connect the power cable to 220V AC power supply. Set the power switch to start or stop the work. Turn off the power when not in use.
2. The ignition wire is connected to the ignition pin for ignition. The ignition pin is recommended to be in the form of a double point, which is most beneficial for the stable operation of the controller. If the single-fired burner is used, it will increase the probability of the controller being disturbed, so we do not encourage it. Be sure to reliably ground one of the high voltage wires when the customer must use it.
3. A 24V gas solenoid valve is connected to the solenoid valve line to control the total oil circuit of the stove.
4. Two-core waterproof plug is connected to the infrared emitter.
5. Four-core waterproof plug is connected to the infrared receiver.
6. In view of the harsh working environment of commercial stoves, in order to ensure long-term reliable operation of the controller, it is strongly recommended to take the waterproof and anti-fouling work of each wire joint seriously. After the debugging, the exposed wires and joints are wound with a wrap and a plastic wrap. Insulating tape and the like are tightly wound.
Installation instructions for the transmitter and receiver:
1. First, on the left side of the front beam of the furnace surface, first open the Φ20mm hole from the edge of 6-10cm. After the middle hole of the base is aligned with the opened hole, open the hole of the fixed base and fix the base of the emitter with the rivet. Insert the emitter into the hole, adjust the direction and fix the emitter with screws.
2. Drill the base of the emitter with a rivet according to the shape of the emitter;
3. Fix the receiving head on the back plate. Different hobs have different fixed positions, generally installed as follows;
a. Avoid the high temperature area of the exhaust vent and the high temperature area on the back of the stove;
b. The optical path of the transmitting head and the receiving head passes through the center point of the furnace
c. The optical path connection between the transmitting head and the receiving head cannot be blocked by the height of the furnace, and the nearest distance is 1-2 cm higher than the furnace;
d. Place the pot on the pan holder and do not block the light path connection between the emitter and the receiving head; at this time, the light path connection should be 2~4CM in front of the pot.
4. Open the Φ20mm hole at the selected position on the back plate. After the middle hole of the base is aligned with the hole opened, open the hole of the fixed base, fix the base of the receiving head with the pull stud, insert the receiving head into the hole, and adjust it. Then fix the receiving head with screws.
5. If two sets of controllers are installed on the double-head hob, the left and right sides are symmetrically installed. The two receiving heads are in the middle and the two transmitting heads are on both sides. Commissioning instructions for the controller:
1. Commission the power after installing all components. Infrared radiation debugging:
A. The upper part of the aluminum infrared component has a small eye. The function is to emit a beam of infrared light that is invisible to the naked eye to the receiving head to detect whether there is a pot on the stove. When there is a pot, the light will be blocked and the receiving head will not be received, otherwise an infrared signal will be received. This infrared ray is modulated and will not be confused with other infrared rays in the environment. The receiving head will clearly filter out this effective signal to achieve a correct judgment on the existence of the pot.
B. The aluminum infrared component has a glass window at the side end, which is a receiving head, built-in infrared receiving component and status indicator. The light is always on, indicating that the correct infrared signal is received, indicating that the infrared light is not blocked, and the transmitting and receiving directions are basically Normal, within the valid range. On the contrary, the flashing of the light indicates that the infrared signal is not received, indicating that the infrared light is blocked or emitted by the cookware, and the receiving direction is not within the effective range.
C, adjust the transmitting head to make the transmitting head emit in the direction of the receiving head. At this time, the infrared emitting head is blocked, the receiving head red light flashes, indicating that the receiving head controller is ignited, the electromagnetic valve is opened, and the receiving head is red when removed. Always bright. Precautions:
1. In the state of power or ventilation, the operator or other personnel are strictly prohibited to use the head or other body parts close to the burner, or block the light path to avoid fire burns. When it is necessary to check for fire, the fan must be turned on;
2. Under the working condition, it is strictly forbidden to place other items in the light path, so as to prevent the light path from being out of control.
3. To better experience the performance of this product, periodically wipe the transmitter and receiver with a soft object such as a sponge.
4. Cover the receiver's transmitter with something when cleaning the stove to prevent hard objects from getting scratched or water.
5. For everyone's safety, always close the main valve when not using the stove! ! !
6, commercial stove igniter – lead wire connection description: two high-voltage ignition wire 800mm with double-needle ignition needle for relative ignition, or a high-voltage ignition wire 800mm with ignition needle, and another high-voltage ignition wire 800mm The furnace body, the distance between the ignition needle and the metal of the burner is 5-6mm, and the ignition is discharged for the burner to form an ignition circuit. Ignition high-voltage line connection: The company strongly recommends that the customer use the dual-purpose ignition for the ignition needle. This kind of ignition effect is better. If the double-needle can only be used with a single needle because of the burner, one of the high-voltage output leads 800mm Connect the ceramic ignition needle, another high-voltage output lead 800mm must be fixed on the burner with screws. The distance between the ignition needle and the metal of the burner is 5-6mm. The ignition is discharged against the burner to form an ignition circuit. Note that it is not on the stove, it is not attached to the hob. If it is connected to the hob, the ignition circuit is very long. Moreover, the hob and the burner are not necessarily connected, so the ignition is cut off. In the loop, the igniter only uses half the power. Maybe you can hardly understand the truth at the same time. Maybe you will say that I have been connected in this way. It is very good. You just have to try it. So the igniter output high voltage line produced by our company is double long line. Length 800mm,
Infrared anti-air burning controller installation precautions
1. The installer must have an electrician installation qualification.
2. The rated input voltage of this igniter is 220V 50HZ. A qualified leakage circuit breaker must be installed at the front end of the power supply. The metal casing of the cooker must be protected by a grounding wire. It is strictly forbidden to connect the metal casing with a neutral wire!
3. The control switch on the panel should use a bipolar power switch of not less than 5A/250V, and the igniter power cord is connected to the power switch.
4. The controller can be fixed or suspended in the lower space of the cooker, and should avoid high temperature radiation baking.
5. High-voltage line is connected to the ignition needle. It is recommended to use dual-ignition ignition mode. The discharge spacing of the ignition needle is 3-5mm. Try not to use the single-discharge method. If only one high-voltage line is connected to the ignition needle, the other high-voltage line must be reliably connected to the burner. On the metal body, it can not be easily connected to the metal casing of the cooker, which will bring many difficult problems!
6. The length of the high-voltage line is “sufficiently long and shortest”. It is better to separate the two lines by more than 3 cm, and maintain a certain degree of drooping arc to facilitate oil drop. The high-voltage line can not be extended continuously. The wiring is not allowed to be close to the iron frame and iron plate of the stove. Do not add all kinds of casings. It is absolutely necessary to avoid twisting the two high-voltage wires together to avoid high-frequency high-voltage leakage.
7. Regularly clean up debris and do not rinse with water.
Brand BESFUL Model LC-215B + Type of intelligent temperature control regulator Measuring range -20 ~ + 140 Measurement error -10 ~ + 10 the opening size 51x71 mm Installation type window mounted output signal 6000 mA Operating voltage 220 V Dimensions 55x75x85 mm Code Senation Job Description Setting range default value 1-H temperature difference 0-80 ℃ 10 ℃ 1-P temperature difference lower limit hysteresis 1-30 ℃ 5 ℃ PH collector plate antifreeze temperature control value -1-8 ℃ 3 ℃ HS ℃ high temperature zone temperature deviation correction value -10-10 ℃ 0 ℃ LS ℃ low temperature zone deviation correction [...]
88.00 $ Add to cartFully compatible with the general-purpose OCE-K339L controller, the materials are more sophisticated, the performance is more stable, and the anti-interference is stronger. Upgrade does not increase the price, if our improvement can improve your quality, I DO. 1. Plate upgrade: It adopts Aobolai KB Class A FR4 glass fiber board, which has better electrical performance and higher safety. 2, process upgrade: SMD surface patch technology, double-sided wiring design, automatic production efficiency, more stable performance; buzzer built-in, to avoid collision during transportation and use the housing to expand the sound, the sound is louder. 3, program upgrade: the main control chip [...]
115.00 $ Add to cartF2 type with fine adjustment anti-air burning commercial stove controller description The controller is suitable for the alcohol oil electromagnetic pump injection combustion system with blower, has infrared automatic air defense burning function, external igniter, can realize automatic high energy ignition and air defense burning, can meet the automatic control and safety energy saving needs of modern kitchen stoves. . Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V 3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 300W 5, igniter power: AC220V, no more [...]
208.75 $ Add to cartWater-cooled constant temperature electric vaporization controller description The controller adds water cooling thermostat function based on all the control functions and structural advantages of the GN-787E series electric vaporization controller. Combined with water-cooled electric vaporization burner, it can realize constant temperature vaporization, improve work stability and reliability, and is an upgraded product of electric vaporization. The controller is a plastic shell moisture-proof structure, with its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan. In addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output, etc. There [...]
440.00 $ Add to cartQuick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the effect [...]
458.75 $ Add to cart360 Rotation BBQ Lighter USB Windproof Flameless Kitchen Plasma Ignition for Gas Stove Candle Barbecue Specification: Product size: Length 260mm Product material: aluminum + zinc alloy Product packaging: Blister packaging Charging port: type-C Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X BBQ Lighter 1 X USB Cable [...]
Hello Welcome to our store! Quality is the first with best service. customers all are our friends. Portable automatic ignition snap-on butane metal field barbecue heating flame gun welding gas torch feature: 100 brand new and high quality Can be upside down Output power rate: 960kcal / 1.11kw / 3809BTU Burning value: 80g / h Flame temperature: up to 1300° Air consumption: 50g-140g / h Each tank of gas can be used for 1.6h-2h It only takes 2 seconds to change gasoline Weight: 174g Length: 17.5 cm Package Contents: 1x flame gun not including gas tank note: 1. Please keep [...]
Function description of alcohol-based fuel vaporization controller for precise regulation of firepower The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear [...]
415.00 $ Add to cartAttention Our Store, Enjoy An Extra Discount, And The Price Is More Favorable! Description: Name: Kindling Wood Fire Starter Sticks Material: Wood Size: 11.4cm Quantity: 300pcs/500pcs Specifications: 100 All Natural Firewood Kindling : we never use additives and chemicals, only eco friendly pine wood, it makes fire starter ideal campfire accessories. Don’t lose your time and energy: kindling sticks ignite extremely quickly and only 1-3 firewood starter logs is enough to start a fire. Advice - put crisscrossed 3 or more fire starter lighter sticks, after put your wood logs on top to start your flame quickly and [...]
N5 controller N6 controller with flameout protection N5K type with pressure cooker type anti-air burning function Type N5B with pump front valve function N5Y type with rocker switch control N5R type plus remote control function DY3HF high energy igniter N series atomization controller description This series of controllers is used in conjunction with a methanol spray burner for ignition and fire regulation. With the extinguishing function, it can be used in places such as steaming furnaces. System parameter setting method: Press and hold the setting button to enter the system parameter setting, turn the knob to select the desired menu, [...]
65.00 $ Add to cartmodname=ckeditor Please note before placing an order This dress is a new product just released this year. It has a retro washing style and is looser to wear. Please pay attention to browse the size information table before placing an order, and place an order with reference to the size. If you have any questions when choosing a size, you can send me a message, and I will reply to you as soon as I see it. modname=ckeditor Our Service Q:Wholesale and drop shipping are both welcomed? We support customization, if you have clothes [...]
modname=ckeditor modname=ckeditor Asian Size Length Bust Shoulder Sleeve For Weight UNIT CM CM CM CM KG 57 88 37 55 40-50 58 92 38 56 50-57 XL 59 96 39 57 57-62 2XL 60 100 40 58 60-67 3XL 61 104 41 59 65-75 4XL 62 108 42 60 75-80 5XL 63 112 43 61 80-85 Note: 1.Measure error within 2-4cm is normal 2.This is Asian size, it is usually smaller than Europes size, please check the above detailed measurement to choose the correct size before you order it. 3. As different computers display a different color, [...]
Women Casual Sequin Print Mesh Long Sleeve Cold Shoulder Loose Splice T-Shirt Blouse Tops We can guarantee that the overall style displayed in the photography is accurate, however there may be differences in how the style appears during wear. This depends on other physical variables, e.g. personal body size, body shape, limb proportion, height, etc. Description: Special Print/O-neck/Splice design It is made of high quality materials, durable for your daily wearing! This is a great gift for your lovers or yourself. Season: All Gender: Women Style: Daily/Casual/Beach Material: Polyester Pattern Type:Print Sleeve length: Long Sleeve Neckline: Slash-neck Decoration: Mesh Silhouette:Loose [...]
Product Size Size: S , Bust: 92 cm, Shoulder: 63 cm, Sleeves: 63 cm, Length: 65 cmSize: M , Bust: 96 cm, Shoulder: 64 cm, Sleeves: 64 cm, Length: 66 cmSize: L , Bust: 100 cm, Shoulder: 65 cm, Sleeves: 65 cm, Length: 67 cmSize: XL , Bust: 104 cm, Shoulder: 66 cm, Sleeves: 66 cm, Length: 68 cmAttention: 1 inch=2.54 cm, 1 cm=0.39 inch Please strictly follow the size chart to select the size. Do not select directly according to your habits. This clothing size information is just for reference only, and may have 2-3cm differences due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated [...]
Note : Please do not display pictures in the message area. Material Type: Aluminum Size: 14mm Please pay attention to the size before you order. Items Included in Purchase: 2pcs- 20pcs Features: x The product is concave and convex, arc. Fine workmanship, no fading. x Comes with adhesive on the back, just peel and sticker easy. x Clean the installation location before installation, [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.