Motorcycle Heated Handgrips E-bike Snowmobile Handlebar Handles Heater Kit For Harley Suzuki Yamaha Motorcycles Grip Warmers

Description

Motorcycle Heat Hand Grip Kit Pads Flexible

Features：

Voltage:12V

Power: 10W

With ON/OFF switch

Description
:

Keep your hands warm in cold weather riding.
Fits for all 12V motorcycle, E-bike and other vehicles.
Easy to install and operate.
Just need to wire this in to a positive wire from your ignition.
With all necessary bits and pieces to install these under your current handgrips.
If the bike doesnt have a battery,just need to locate the DC regulator.
Installation instructions:

1.Place the heat plate on the right position
2.Wrap the heat plate around to the handlebars evenly,especially at the junction with the heating plate.
3.Put on the jacket tube and adjust the position,using a hot-air gun blowing outer sleeve shrinkage uniformity.
4.Mount the switch in the rod of the rear view mirror.
5.Connect the power line.Line Red and Line Black are not divided into positive and negative,but must installed in the line control by the ignition key.
Package Included:

2 x heat shrink tubing : Black

2 x heater size : 95x80mm

1 xAdhesive tape

Regarding the chromatic aberration and dimension error :

As the light problem and the measuring method difference,maybe have a little error, please note and understand.

If there were any doubt or problem for the goods,please do not just give me Negative Feedback. And, please contact with me from Aliexpress firstly, and let me know the detail, and then we will try to solve the problem for you as soon as possible.
Whatever,we hope and sure everything will go well. And, we kindly invite you to give us FIVE Stars Positive Feedback.
Thank you very much.