Repair Durable Replacement Parts MTB Bike Brake Set Callipers Front Rear Universal Aluminum Alloy Outdoor Cycling Levers

Description

Features:
Corresponding Opening Hole: the V brake hole position corresponds to the V brake hole position on the front fork.
Material: Made of aluminium alloy material, durable enough to use and not easy to break.
Wear Resistant: Rubber brake pads, wear-resistant and durable, easy to replace, easy to operate.
Easy Installation: Simple installation, no other tools needed, easy to install and remove.
Universal Design: Suitable for most V brake type use, practical and easy to use.

Installation method:
1: tighten the screws of the fixed hole of the brake corresponding to the fixed hole of the car body
mainly the description of the rebound force in the following figure;
2: pass the brake wire through the metal wire tube and the leather tube successively,
and fix the position of the metal wire tube as shown in the figure;
3: Fix the brake wire on the fixing bolt not too tight, then install the brake leather,
adjust the distance of the brake leather and the length of the brake wire properly, and then fix the brake wire firmly.

Installation Instructions: Adjust the rebound force of the brake
1: the brake vertically downward screw hole and spring bayonets into the corresponding position and then fix the screw,
and then turn the brake clockwise to the brake cable installation position on both sides of the same operation,
which can effectively improve the rebound force of the brake;
2: You can also adjust the rebound strength of the bolt to adjust the rebound strength.

Specification:
Material: Aluminum Alloy
Color: Silver, Black
Installation hole diameter: 22.2 mm/0.9 inch
Size: About 12.7 x 2.8 cm/5.0 x 1.1 inchL x H
Front Brake line
length: About 72 cm/28.3 inch
Rear
Brake line
length: About 175 cm/

68.9 inch

Package included:
Brake line x 2
Tube soft sleeve x 2,
Brake wire elbow x 2
Resilient strength adjustment bolt x 2
Hexagon wrench x 1
Wrench x 1