Turbowing 2.4G Signal Booster 4W Remote Control Enhancer Radio Signal Amplifier 3-8 km 4000mW 6-16V for FPV Transmitter Receiver

Description

Turbowing 2.4G Signal Booster 4W Remote Control Enhancer Radio Signal Amplifier 3-8 km 4000mW 6-16V for FPV Transmitter Receiver

Description:

This product is a bidirectional power amplifier, specially developed in 2.4 GHz band, which meets the standard of 802.11b/g/n. The product matches direct sequence DSSS, orthogonal frequency division multiplexing OFDM and other frequency expansion technologies. By using Time Division DuplexTDD fast microwave detection technology and linear power amplifier technology, the radio frequency communication distance can be greatly extended while the transmission rate of 802.11b/g/n wireless equipment is constant.

Features:

Lightweight, mini size, advanced circuits ensure a fast and stable signal transmission and receiving.

13dB transmitting gain can enhance the transmission power by 20 times and increase the transmission distance.

4000mW of transmit power can greatly expand radio coverage area.

2.5dB noise figure, it can improve the product receiving sensitivity, greatly expand the receiving distance.

Can expand any 2.4G frequency band, suitable for the TDD work mode product.

Plug and play, no need others software setup.

All metal shell, good heat dissipation.

Specification:

Item Name: Signal Booster

Brand Name: Turbowing

Item NO.: RY24-4W13DB

Output power: 4000mW

Frequency range: 2.4-2.5Ghz

Operating voltage: 6V-16V

Supply current: 435mA at 9V

Receiving gain: 10dB±1

Transmitting gain: 13dB±1

Input power: 3-20dB

DC Power Consumption: 435mA@Pout 28dBm 9V

Noise figure: <2.5dB

TX / RX Switch Delay: <1us

LED Status: GreenTX; RedRX

Operating Temperature: -40 to 70 degree centigrade

Antenna connector: 2 x RP-SMA

Dimension: 64 x 34 x 18mmnot include antenna

Weight: 57.8g

Original box package

Installation steps :

Step 1: Open the controller back cover and find the original signal cable plug of the remote controller.

Step 2: Remove the original signal line and plug in the signal booster feeder plug.

Step 3: Install the signal booster feeder plug, pay attention to IN / OUT not to reverse, power on the signal booster, turn on the remote controller, the power indicator is red.

Package Included:

1 x Turbowing RY-2.4 Signal Amplifier

1 x Signal Cable

1 x Power Cable

1 x Antenna

1 x Manual

Notes by OK RC Store:

RY-2.4 signal booster kit only, others not included.

There may be some deviation due to manual measurement.

The colors deviation might differ due to different monitor settings, please kindly understand.

OK RC has only one store, no branch, other pictures and descriptions of the same store as us , are competitors copying us, we are more professional than them !

We provide you with the best product and service. If you have any problem, please let us know, and we will solve the problem ASAP.

Thank you so much, nice day !