Wavlink AC600 High Power Outdoor WIFI Router/Access Point/CPE Wireless wifi Repeater Dual Dand 2.4/5Ghz 2x7dBi Antenna POE

Description

Wavlink AC600 High Power Outdoor Repeater

• High power and dual polarization delivers long-range coverage

• Passive PoEpower over Ethernet supports for flexible deployment and allows the device to be reset remotely.

• Weatherproof IP65-rated housing resists harsh climates.

• Dual band speed up to 2.4GHz 150Mbps and 5GHz 433Mbps.

• Supports AP, Router, Repeater,WISP as operation modes. In the mode of AP, it provides Access Point, Client, Client Repeater modes for wireless solutions.

How does it work

1.Slide the straps through the slots on the back of the AP/Router and tighten the straps around the hole.

2.Connect one end of an LAN cable to the PoE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router.

3.Use another LAN cable to connect the LAN port of the power supply.

4.Plug the power adapter into a wall socket.

Note

–Select the wireless network with a signal strength greater than 70 to get the most reliable connection.

–The outdoor antennas should be installed at a height of 2 meters above the roof, or in a high open place for better reception.

–The signal is according to your environment and channel ,different environment will have different distance .

–Passive PoE power supply though Ethernet cable does not work over 60 meters.

—The PoE part of the router is not waterproof.