XH-W1219 W1219 DC12V Dual LED Digital Display Thermostat Temperature Controller Regulator Switch Control Relay NTC Sensor Module

Description

Features:

1. Power Supply: DC12V

2. Relay Current: <50mA

3. Dimensions: 47 x 40mm

Instructions:

1. Please pay attention for your first use. You need wait 6s after your setting data, the module will save the date you have set after 6s.

2. Short press button SET: If you start the time setting mode , Nixie tube will blink. You could adjust the time T1 and T2 by button+ and button-. Please wait 5s after your setting date, the module will save the date you have set after 5s

3. Long press button SET: if you start the parameter setting mode. There are two group parameter for your choice : P0 and P1. You could switch P0 or P1 by short press SET. Under the parameter P0 and P1,you could set the timing mode by the button+ and button-.

P0–0: timing mode is 0–999 seconds

P0–1: timing mode is 0–999 minutes

P0–2: timing when the pattern is 0–999

P1–0: T1 time delay relay T1 timer

P1–1: T1 delay time relay releases T1 timer

P1–2: time delay relay after T1 T1 timer, then the delay time T2 successor electrical release T2 timing ends.

P1–3: T1 delay time relay releases T1 timer, then the delay time T2 successor Electric energized T2 timing ends.

P1–4: time delay relay after T1 T1 timer, then the delay time T2 successor electrical release T2 timer, repeat the cycle.

P1–5: T1 delay time relay releases T1 timer, then the delay time T2 successor Electric energized T2 timer, repeat the cycle.

Package included:

1 x DC12V Relay Module Dual LED Display Cycle Relay Module